Lynx-studio LT-ADAT User Manual

User Manual Lynx Studio Technology, Inc. www.lynxstudio.com [email protected]

10 ADAT Channel Mapping and S/MUX This section describes the mapping of LSLOT channels to LT-ADAT channels. This mapping varies with sample rate sin

11 Specifications ADAT OPTICAL I/O Number / Type Two inputs and two outputs, compatible with Alesis ADAT Type I and Type II Optical Digital Interfac

12 Support We are devoted to making your experience with the LT-ADAT trouble-free and productive. If the troubleshooting and operational sections of

13 Warranty Information One year Free Labor / One year Parts Exchange This product must be returned to the factory for repair. Who Is Covered? Yo

User Manual Table of Contents 1 Introduction...

1 Introduction Thank you for purchasing the LT-ADAT™! We are proud to provide you with a reliable, professional-quality product for your digital aud

4 Nomenclature used in this manual The following typographic conventions are used in this manual:  ALL UPPER CASE TEXT refers to a specific parame

6 Installation Procedure 1. Remove the AC power cord. Take the top off of the Aurora 16 or Aurora 8. There are seven large screws plus one small scr

6. Attach one end of the included ribbon cable to the 14-pin header labeled “JP2” on the LT-ADAT. Insure that the ribbon cable is exiting the top sid

7 External Connections The photo below details LT-ADAT connectors. The LT-ADAT provides two ADAT optical inputs and outputs. They are labeled on t

8 Aurora Routing After installation, the Aurora will need to be configured to send and receive signals from the LT-ADAT. Signals from the ADAT inp

The figures below detail three common clock schemes: 9.1 Aurora as clock master, ADAT device slaves to wordclock Aurora SYNC SOURCE: INT ADAT De