Lynx-studio AES16 User Manual download pdf (Page 45)

Lynx Mixer Reference

6.2 Adapter Window

q Sample Clock Section

This section of the mixer provides control of the system sample clock generator. All AES16 audio devices on a

single card MUST have identical sample rates since there is one on-board generator. Sample rates cannot be

changed while AES16 is playing or recording.

Source

This control selects the clock source that drives the sample clock generator

from the following options:

Internal Clock derived from the on-board crystal oscillator

External Clock signal from BNC CLOCK connector

Header Clock signal from the CLOCK IN header

LStream Clock signal from the LStream port

Digital In 1 Clock signal from the Digital 1 Input

Digital In 2 Clock signal from the Digital 2 Input

Digital In 3 Clock signal from the Digital 3 Input

Digital In 4 Clock signal from the Digital 4 Input

Reference

Provides selection of the clock source reference type. This control must be set match the type of clock source

selected as the sample clock source. The available choices are:

Auto Automatic selection; valid for Internal, Digital, and Video clock sources

13.5 MHz 13.5 MHz video dot clock; valid for External and Header clock sources

27 MHz 27 MHz video dot clock; valid for External and Header clock sources

Word Word clock; valid for External, Header, and LStream clock sources

Word256 256 times word clock; valid for External and Header clock sources

AES16 User Manual 45

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 80 81

No comments

Lynx-studio AES16 User Manual Page 45