Lynx-studio AES16 User Manual download pdf (Page 69)

8BConfiguring Multiple AES16’s

9.2 Adapter ID’s

When multiple AES16 cards are installed in a

computer they are automatically assigned unique

adapter ID numbers. These adapter ID’s provide

a means to identify and communicate with each

AES16 when using the Lynx Mixer application

and to select audio devices in third party

applications.

In the Lynx Mixer, the adapter that a user wishes

to control is selected from the “Window” pull-

down menu. In a system with four AES16’s the

adapters will be listed as follows:

AES16 1 Mixer

AES16 2 Mixer

AES16 3 Mixer

AES16 4 Mixer

In each case, the adapter ID is the numeric

character just before the word “Mixer” in each

selection.

Most third party applications provide a setup or

configuration menu for selecting a desired wave

audio device for recording and playback. With

multiple AES16’s in a system, each device name

will contain the adapter ID. For example, the

first play device on adapter 2 is listed as “AES16

2 Play 1”.

9.3 Cable connections

Starting with the master AES16, insert the plug

on one end of a Lynx Internal Clock Cable into

the CLOCK OUT header, until it clicks and

locks into place. This header is polarized to

ensure the correct orientation of the cable plug.

Insert the plug on the free end of the cable into

the CLOCK IN header, on the nearest slave

AES16. Connect each slave in a similar manner.

Refer to the figure below:

I/O PORT A

I/O PORT B

LSTREAM

AES16 Master

Internal Clock Cable

I/O PORT A

I/O PORT B

LSTREAM

AES16 Slave 1

AES 1

I/O PORT A

I/O PORT B

LSTREAM

AES16 Slave 2

AES16 User Manual 69

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 80 81

Comments to this Manuals

No comments

Lynx-studio AES16 User Manual Page 69

Comments to this Manuals

Related products and manuals for Audio Lynx-studio AES16