Lynx-studio AES16 User Manual download pdf (Page 53)

Lynx Mixer Reference

6.4 Outputs Window

1^ Output Monitor Source Buttons

These buttons control the routing of record and playback sources that feed each of the 16 output channels. Since

each output is derived from the sum of the four sources, each button controls the selection of one of the sources.

When a button is clicked, a pop-up menu is launched that displays the available

sources that can be selected. A Record submenu lists inputs and their

corresponding the record devices (which is dynamically updated to reflect Input

Source selections in the Record/Play window). A Play submenu lists the left and

right channels of the eight play devices. The No Source option disables a monitor

source.

The example to the left shows Digital In 1 L being selected as one of the four

sources for OUT 1 L.

After a monitor source is selected, a four-character abbreviation of the selection is

placed on the button. For example, DI1L indicates Digital In 1 Left.

1^ Output Monitor Mute Buttons

The buttons, labeled M, located to the right of each Output Monitor Source Button control the muting of the

adjacent monitor source. When the button is “pushed in”, the mute function is enabled.

1& Overload Indictor

This indicator represents the number of signal overloads that have occurred on an output. Overloads occur when the

summation of the four monitor sources feeding an output exceeds the full scale digital output level.

AES16 User Manual 53

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 80 81

No comments

Lynx-studio AES16 User Manual Page 53